Skip to main content

CVE-2026-93669zephyrproject zephyr null pointer dereference

Low priorityMedium4.7EPSS not scored yet

CVE-2026-93669 is a null pointer dereference in zephyrproject zephyr, rated medium (4.7 on CVSS 3.1).

Why this priority: Medium severity, with no exploitation signal.

Published · Updated · NVD status: Awaiting Analysis

What it is

Code uses a null pointer and crashes, usually taking the service down.

How it is reached

An attacker can exploit it by someone who can already run code or sign in on the machine, with an ordinary user account, and nobody has to click anything. Success also depends on conditions the attacker does not fully control.

What an attacker gains

A successful attack can take it offline. In practice, this kind of flaw lets an attacker crash the process, read memory, or in the worst case run code.

Is it being exploited?

There is no public report of exploitation yet.

What to do

  1. Upgrade zephyrproject zephyr to a fixed version for your release line (4.3.2, 4.5.0).
  2. Limit who can run code or sign in on the hosts that run it.

Description from NVD

The ITE IT8xxx2 SHI host-command backend in subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c arms the SPI peripheral before its receive context exists. shi_ite_init_registers() sets the state machine to SHI_STATE_READY_TO_RECV and calls irq_enable() while the device initializes at POST_KERNEL priority CONFIG_KERNEL_INIT_PRIORITY_DEFAULT (40), but data->rx_ctx and data->tx are only assigned later by shi_ite_backend_init(), which ec_host_cmd_init() invokes at CONFIG_EC_HOST_CMD_INIT_PRIORITY (default 80).

If the attached host processor starts a SPI transaction inside that window, the Rx-valid-length interrupt fires, shi_ite_int_handler() passes its state check and calls shi_ite_parse_header(), which stores the host-derived request length through the still-NULL data->rx_ctx. On the IT8xxx2 low addresses are not backed by RAM, and with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_PMP the first bytes of the address space are explicitly made inaccessible, so the store raises a fatal access fault in interrupt context. The window widens further when CONFIG_EC_HOST_CMD_INITIALIZE_AT_BOOT is disabled and the application calls ec_host_cmd_init() itself.

The result is a kernel panic on the embedded controller: with Zephyr's default fatal handler the CPU halts, so the controller stops servicing host commands until a hardware reset. Because the trigger is traffic from the attached host processor -- an untrusted peer from the controller firmware's point of view -- software on that host can provoke the fault by forcing a controller reset and issuing transactions during the reboot, turning a recoverable reset into a persistent outage. Impact is limited to availability: the faulting address is fixed and not attacker-chosen, so no memory-corruption primitive follows.

The fix leaves the interface at SHI_STATE_DISABLED with the interrupt masked during device init, moves irq_enable() into shi_ite_backend_init() after the buffers are published, and makes shi_ite_int_handler() reject a NULL data->rx_ctx while write-clearing IT83XX_SPI_ISR and IT83XX_SPI_RX_VLISR so that an unexpected early interrupt cannot storm.

What this means for your architecture.

A CVE names a product. Whether it matters depends on where that product sits in your systems: what reaches it, which trust boundary it guards and what it can reach once compromised. Veriom maps your components, their relationships and your trust boundaries from your code, cloud and delivery evidence, so you can see where a component like this sits. The radar itself does not look at your systems.

Components it touches

  • Native code: operating systems, browsers and firmware. The flaw sits wherever native code reads untrusted data.
  • Network appliances and media or file parsers. The flaw sits wherever native code reads untrusted data.

Trust boundaries in play

  • Host boundary. The attacker needs a foothold on the machine first; the flaw turns a small foothold into a bigger one.
  • Wherever native code reads untrusted data. An attacker who crosses it can crash the process, read memory, or in the worst case run code.

Questions to answer about your own systems

  • Where does zephyrproject zephyr run in your systems, and at which version?
  • Which of those hosts also run code or users you do not fully trust?
  • What can it reach once compromised: which data stores, secrets and services?

Sources

  • CVE records and CVSS scores from the NVD CVE API. This product uses the NVD API but is not endorsed or certified by the NVD.
  • Exploitation status from CISA’s Known Exploited Vulnerabilities catalog.
  • Exploit likelihood from FIRST’s Exploit Prediction Scoring System (EPSS), refreshed daily.
  • Explanations are written by Veriom from fixed templates over each record’s data, not by a person reviewing each CVE. Descriptions are quoted from the records as published.